|
|
|
National Stock Number:
3040-01-149-6706
Federal Supply Class:
3040
National Item Identification Number:
011496706
Description:
SHAFT,STRAIGHT
Detail:
A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for jubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
|
Manufacturer Information:
| 2520011496706 | A00AM | E.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE | | 2520011496706 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE | | 8624772 | 11862 | GENERAL MOTORS CORP CHEVROLET MOTOR DIV SPECIAL PRODUCTS DEPT | | 8624772 | 7X677 | GENERAL MOTORS LLC | | 8679950 | 7X677 | GENERAL MOTORS LLC |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.9800 INCHES NOMINAL | | FIRST END PITCH DIAMETER | 0.9375 INCHES NOMINAL | | FIRST END PRESSURE ANGLE | 30.0 DEGREES NOMINAL | | FIRST END SPLINE LENGTH | 1.280 INCHES NOMINAL | | FIRST END SPLINE MAJOR DIAMETER | 0.9750 INCHES MINIMUM AND 0.9930 INCHES MAXIMUM | | FIRST END SPLINE MINOR DIAMETER | 0.9050 INCHES MINIMUM AND 0.9100 INCHES MAXIMUM | | FIRST END SPLINE QUANTITY | 30 | | FIRST END STYLE | SPLINED (INVOLUTE) | | OVERALL LENGTH | 9.200 INCHES MINIMUM AND 9.280 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | SAE 10B46 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | SECOND END DIAMETER | 0.9880 INCHES MINIMUM AND 0.9990 INCHES MAXIMUM | | SECOND END PITCH DIAMETER | 0.9375 INCHES NOMINAL | | SECOND END PRESSURE ANGLE | 30.0 DEGREES NOMINAL | | SECOND END SPLINE LENGTH | 0.860 INCHES NOMINAL | | SECOND END SPLINE MAJOR DIAMETER | 0.9750 INCHES MINIMUM AND 0.9980 INCHES MAXIMUM | | SECOND END SPLINE MINOR DIAMETER | 0.9050 INCHES MINIMUM AND 0.9100 INCHES MAXIMUM | | SECOND END SPLINE QUANTITY | 30 | | SECOND END STYLE | SPLINED (INVOLUTE) | | SPECIAL FEATURES | BOTH ENDS PARTIAL BORE,0.312 IN. DIA,2.870 IN. LG FIRST END,1.410 IN. LG SECOND END;BOTH ENDS CIR GROOVED,0.150 IN. W,0.895 IN. DIA,1.280 IN. DISTANCE FROM FIRST END TO GROOVE,0.860 IN. DISTANCE FROM SECOND END TO GROOVE;FIRST END TWO CROSS DRILLED THRU HOLES,0.187 IN. DIA,1.610 IN. DISTANCE FROM HOLE C TO END,1.120 IN. DISTANCE BTWN HOLE C;SECOND END CROSS DRILLED THRU HOLE,0.187 IN. DIA,1.245 IN. DISTANCE FROM HOLE C TO END | | SURFACE FINISH | 10.0 MICROINCHES |
|
|