|
|
|
National Stock Number:
3040-01-149-7846
Federal Supply Class:
3040
National Item Identification Number:
011497846
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 3595-032 | 31361 | WOODWARD, INC. | | 3595-032A | 1DN60 | ALL DIESEL POWER INC |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.6480 INCHES NOMINAL | | FIRST END SPLINE LENGTH | 0.750 INCHES NOMINAL | | FIRST END SPLINE MAJOR DIAMETER | 0.6480 INCHES NOMINAL | | FIRST END SPLINE MINOR DIAMETER | 0.6000 INCHES NOMINAL | | FIRST END SPLINE QUANTITY | 12 | | FIRST END STYLE | SPLINED (STRAIGHT) | | LARGEST STEP DIAMETER | 0.875 INCHES NOMINAL | | MATERIAL | STEEL COMP 4140 | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 8.469 INCHES NOMINAL | | SECOND END DIAMETER | 0.6236 INCHES NOMINAL | | SECOND END KEYWAY DEPTH | 0.107 INCHES NOMINAL | | SECOND END KEYWAY WIDTH | 0.1885 INCHES NOMINAL | | SECOND END DISTANCE FROM KEYWAY CENTER TO END | 1.375 INCHES NOMINAL | | SECOND END EXTERNAL KEYWAY LENGTH | 1.250 INCHES NOMINAL | | SECOND END EXTERNAL THREAD LENGTH | 0.812 INCHES NOMINAL | | SECOND END STYLE | EXTERNALLY THREADED AND INDENTED FLAT KEYWAY | | SPECIAL FEATURES | PARTIAL BORE 0.109 IN. DIA,0.312 IN. DP ON 2ND END;2 CROSS DRILLED THRU HOLES 0.012 IN. DIA,0.188 IN. DISTANCE FROM HOLE CENTERS TO END,LOCATED DEG APART | | STEP QUANTITY | 4 | | SURFACE FINISH | 16.0 MICROINCHES |
|
|