|
|
|
National Stock Number:
3040-01-150-0463
Federal Supply Class:
3040
National Item Identification Number:
011500463
Description:
LEVER,REMOTE CONTROL
Detail:
A rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
|
Manufacturer Information:
| 77643-42X9 | 96169 | ELECTRIC BOAT CORPORATION | | 77643-42X9 PIECE 7 | 96169 | ELECTRIC BOAT CORPORATION | | SSN637-501-2159964 | 80064 | NAVAL SHIP SYSTEMS COMMAND | | SSN637-501-2159964 PIECE 7 | 80064 | NAVAL SHIP SYSTEMS COMMAND |
|
Techincal Specification:
| BORE TYPE | SPLINED | | CENTER TO CENTER DISTANCE BETWEEN LINK AND SHAFT HOLES | 3.500 INCHES NOMINAL | | DISTANCE BETWEEN FORK INSIDE SPREAD | 0.750 INCHES NOMINAL | | FEATURES PROVIDED | COUNTERBORE | | LINK END THICKNESS | 1.500 INCHES NOMINAL | | MAJOR DIAMETER | 1.124 INCHES MINIMUM AND 1.125 INCHES MAXIMUM | | MATERIAL | STEEL | | MINOR DIAMETER | 0.967 INCHES MINIMUM AND 0.968 INCHES MAXIMUM | | SHAFT END THICKNESS | 1.500 INCHES NOMINAL | | SHAFT SECURING METHOD | SPLINE | | SPECIAL FEATURES | LEVER IS NOT OFFSET | | SPLINE QUANTITY | 10 | | STYLE DESIGNATOR | OFFSET, CLEVIS LINK END |
|
|