|
|
|
National Stock Number:
3040-01-152-0174
Federal Supply Class:
3040
National Item Identification Number:
011520174
Description:
SHAFT,STRAIGHT
Detail:
A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for jubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
|
Manufacturer Information:
| 7682-359 | 11871 | RECON/OPTICAL, INC. | | 7682-359-1 | 11871 | RECON/OPTICAL, INC. | | 7682-359-1 | 80294 | BOURNS INSTRUMENTS INC |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DISTANCE FROM END TO GROOVE | 0.047 INCHES NOMINAL | | FIRST END DIAMETER | 0.0933 INCHES NOMINAL | | FIRST END GROOVE DIAMETER | 0.0750 INCHES NOMINAL | | FIRST END GROOVE WIDTH | 0.0190 INCHES NOMINAL | | FIRST END STYLE | CIRCULAR GROOVED | | OVERALL LENGTH | 3.281 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-764 COND A CL 303 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 303 | | SECOND END DISTANCE FROM END TO GROOVE | 0.054 INCHES NOMINAL | | SECOND END DIAMETER | 0.0933 INCHES NOMINAL | | SECOND END GROOVE DIAMETER | 0.0750 INCHES NOMINAL | | SECOND END GROOVE WIDTH | 0.0190 INCHES NOMINAL | | SECOND END STYLE | CIRCULAR GROOVED | | SURFACE FINISH | 63.0 MICROINCHES |
|
|