|
|
|
National Stock Number:
3040-01-152-0645
Federal Supply Class:
3040
National Item Identification Number:
011520645
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 709-4684912 | 80064 | NAVAL SHIP SYSTEMS COMMAND | | 709-4684912 ITEM 23 | 80064 | NAVAL SHIP SYSTEMS COMMAND | | 87832-1641 | 96169 | ELECTRIC BOAT CORPORATION | | 87832-1641 ITEM 23 | 96169 | ELECTRIC BOAT CORPORATION |
|
Techincal Specification:
| END SIMILARITY | IDENTICAL | | EXTERNAL KEYWAY LENGTH | 1.104 INCHES NOMINAL FIRST END | | FIRST END DIAMETER | 0.7480 INCHES NOMINAL | | FIRST END DISTANCE FROM KEYWAY CENTER TO END | 0.716 INCHES NOMINAL | | FIRST END STYLE | INDENTED FLAT KEYWAY | | FIRST END KEYWAY DEPTH | 0.112 INCHES NOMINAL | | FIRST END KEYWAY WIDTH | 0.1890 INCHES NOMINAL | | LARGEST STEP DIAMETER | 1.185 INCHES NOMINAL | | OVERALL LENGTH | 16.280 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-N-281,CLASS A FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | NICKEL ALLOY 400 | | STEP QUANTITY | 5 | | SURFACE FINISH | 63.0 MICROINCHES |
|
|