|
|
|
National Stock Number:
3040-01-152-9216
Federal Supply Class:
3040
National Item Identification Number:
011529216
Description:
SHAFT,STRAIGHT
Detail:
A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for jubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
|
Manufacturer Information:
| 8N2510 | 11083 | CATERPILLAR INC |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DISTANCE FROM END TO GROOVE | 6.057 INCHES NOMINAL | | FIRST END DISTANCE FROM HOLE CENTER TO END | 0.157 INCHES NOMINAL | | FIRST END DIAMETER | 0.2492 INCHES NOMINAL | | FIRST END GROOVE DIAMETER | 0.2290 INCHES NOMINAL | | FIRST END GROOVE WIDTH | 0.0267 INCHES NOMINAL | | FIRST END HOLE DIAMETER | 0.1280 INCHES NOMINAL | | FIRST END STYLE | CROSS DRILLED AND CIRCULAR GROOVED | | MATERIAL | STEEL | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 6.850 INCHES NOMINAL | | SECOND END ANGLE BETWEEN FLATS | 180.0 DEGREES NOMINAL | | SECOND END DIAMETER | 0.2200 INCHES NOMINAL | | SECOND END STYLE | TWO FLATS | | SECOND END STEP LENGTH | 0.240 INCHES NOMINAL | | SPECIAL FEATURES | FIRST END HAS ONE ADDITIONAL,IDENT,CIR GROOVE,0.977 IN. DISTANCE BTWN FIRST AND SECOND GROOVE CTR |
|
|