|
|
|
National Stock Number:
3040-01-154-6861
Federal Supply Class:
3040
National Item Identification Number:
011546861
Description:
SHAFT,STRAIGHT
Detail:
A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for jubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
|
Manufacturer Information:
| 6P7743 | 11083 | CATERPILLAR INC |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 26.4 MILLIMETERS NOMINAL | | FIRST END DISTANCE FROM HOLE CENTER TO END | 32.0 MILLIMETERS NOMINAL | | FIRST END HOLE DIAMETER | 2.0 MILLIMETERS NOMINAL | | FIRST END STYLE | UNTHREADED CROSS DRILLED | | MATERIAL | STEEL | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 104.0 MILLIMETERS NOMINAL | | SECOND END DIAMETER | 26.4 MILLIMETERS NOMINAL | | SECOND END DISTANCE BETWEEN HOLE CENTERS | 29.0 MILLIMETERS NOMINAL | | SECOND END ANGLE BETWEEN HOLES | 180.0 DEGREES NOMINAL | | SECOND END HOLE DIAMETER | 2.0 MILLIMETERS NOMINAL | | SECOND END HOLE DIAMETER | 4.1 MILLIMETERS NOMINAL | | SECOND END DISTANCE FROM HOLE CENTER TO END | 7.0 MILLIMETERS NOMINAL | | SECOND END STYLE | TWO CROSS DRILLED HOLES | | SPECIAL FEATURES | FIRST END HAS PARTIAL BORE,12.0 MM DIA,77.5 MM DP |
|
|