|
|
|
National Stock Number:
3040-01-156-5805
Federal Supply Class:
3040
National Item Identification Number:
011565805
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 2498050 | 3H889 | PARKER-HANNIFIN CORPORATION | | 2498050 | 6T459 | PARKER HANNIFIN CORP AEROSPACE GROUP AIR AND SPACE DIV | | 2498050 | 92003 | PARKER HANNIFIN CORPORATION DIV AEROSPACE GROUP HEADQUARTERS | | 2498050 | 99551 | GOODRICH CORPORATION |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 1.5980 INCHES MINIMUM AND 1.6020 INCHES MAXIMUM | | FIRST END STYLE | PLAIN | | LARGEST STEP DIAMETER | 1.598 INCHES MINIMUM AND 1.602 INCHES MAXIMUM | | OVERALL LENGTH | 2.675 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS6415 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | SECOND END DIAMETER | 1.2580 INCHES MINIMUM AND 1.2620 INCHES MAXIMUM | | SECOND END PITCH DIAMETER | 1.2000 INCHES NOMINAL | | SECOND END PRESSURE ANGLE | 20.0 DEGREES NOMINAL | | SECOND END SPLINE LENGTH | 1.1750 INCHES NOMINAL | | SECOND END SPLINE MAJOR DIAMETER | 1.2580 INCHES MINIMUM AND 1.2620 INCHES MAXIMUM | | SECOND END SPLINE MINOR DIAMETER | 1.0950 INCHES MINIMUM AND 1.1050 INCHES MAXIMUM | | SECOND END SPLINE QUANTITY | 12 | | SECOND END STYLE | SPLINED (INVOLUTE) | | STEP QUANTITY | 6 | | SPECIAL FEATURES | SHAFT BODY EXTERNAL THD DATA: LEFT HAND-8 START INVOLUTE THD,1.296 PITCH DIA; FIRST END BORE 0.8530 - 0.8535 IN. DIA,2.390 - 2.400 IN. L W/8 MICROINCH FINISH; SECOND END BORE 0.437 - 0.439 IN. DIA,0.280 IN. L W/16 MICROINCH FINISH | | SURFACE FINISH | 32.0 MICROINCHES |
|
|