|
|
|
National Stock Number:
3040-01-160-0829
Federal Supply Class:
3040
National Item Identification Number:
011600829
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 071693 | 65597 | THALES USA, INC. | | 071693-0001 | 65597 | THALES USA, INC. |
|
Techincal Specification:
| FIRST END STYLE | PLAIN | | MATERIAL | STEEL COMP 303 | | SURFACE FINISH | 32.0 MICROINCHES | | FIRST END DIAMETER | 0.2487 INCHES MINIMUM AND | | 0.2497 INCHES MAXIMUM | | END SIMILARITY | NOT IDENTICAL | | SECOND END STYLE | FLAT KEYWAY | | SECOND END KEYWAY WIDTH | 0.0630 INCHES MINIMUM AND | | 0.0650 INCHES MAXIMUM | | SECOND END EXTERNAL KEYWAY LENGTH | 0.120 INCHES MINIMUM AND | | 0.130 INCHES MAXIMUM | | SECOND END KEYWAY DEPTH | 0.120 INCHES NOMINAL | | SECOND END DIAMETER | 0.5000 INCHES NOMINAL | | LARGEST STEP DIAMETER | 0.500 INCHES NOMINAL | | OVERALL LENGTH | 1.210 INCHES MINIMUM AND | | 1.250 INCHES MAXIMUM | | STEP QUANTITY | 2 | | SPECIAL FEATURES | SECOND END PARTIAL BORE,0.150/0.152 IN. DIA,0.070/0.090 IN. DP |
|
|