|
|
|
National Stock Number:
3040-01-173-1243
Federal Supply Class:
3040
National Item Identification Number:
011731243
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 206T297 | 27315 | MORRIS MATERIAL HANDLING, INC. |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.6350 INCHES MINIMUM AND 0.6390 INCHES MAXIMUM | | FIRST END STYLE | PLAIN | | LARGEST STEP DIAMETER | 0.635 INCHES MINIMUM AND 0.639 INCHES MAXIMUM | | OVERALL LENGTH | 2.156 INCHES NOMINAL | | MATERIAL | STEEL | | SECOND END DIAMETER | 0.4062 INCHES NOMINAL | | SECOND END DISTANCE FROM HOLE CENTER TO END | 0.188 INCHES NOMINAL | | SECOND END STYLE | THREADED CROSS DRILLED (THRU HOLE) | | SPECIAL FEATURES | TWO 0.312 INCH W GROOVES,180 DEG APART | | STEP QUANTITY | 4 |
|
|