|
|
|
National Stock Number:
3040-01-175-8467
Federal Supply Class:
3040
National Item Identification Number:
011758467
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 104779617 | K0654 | SAFRAN LANDING SYSTEMS UK LTD | | 104779617 | U7388 | TRIUMPH AEROSPACE OPERATIONS UK, LTD. |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.3025 INCHES NOMINAL | | FIRST END PITCH DIAMETER | 0.3125 INCHES NOMINAL | | FIRST END PRESSURE ANGLE | 45.0 DEGREES NOMINAL | | FIRST END SPLINE LENGTH | 0.250 INCHES NOMINAL | | FIRST END SPLINE MAJOR DIAMETER | 0.3261 INCHES MINIMUM AND 0.3281 INCHES MAXIMUM | | FIRST END SPLINE MINOR DIAMETER | 0.2864 INCHES NOMINAL | | FIRST END SPLINE QUANTITY | 19 | | FIRST END STYLE | SPLINED (INVOLUTE) | | FSC APPLICATION DATA | CYLINDER ASSEMBLY,ACTUATING,LINEAR | | LARGEST STEP DIAMETER | 0.610 INCHES MINIMUM AND 0.611 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 17-4PH | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 1.795 INCHES MINIMUM AND 1.800 INCHES MAXIMUM | | SECOND END DIAMETER | 0.6100 INCHES MINIMUM AND 0.6110 INCHES MAXIMUM | | SECOND END DISTANCE FROM END TO GROOVE | 0.057 INCHES MINIMUM AND 0.062 INCHES MAXIMUM | | SECOND END GROOVE WIDTH | 0.1830 INCHES MINIMUM AND 0.1880 INCHES MAXIMUM | | SECOND END INTERNAL THREAD LENGTH | 0.200 INCHES NOMINAL | | SECOND END GROOVE DIAMETER | 0.4340 INCHES NOMINAL | | SECOND END STYLE | CIRCULAR GROOVED AND INTERNALLY THREADED | | STEP QUANTITY | 7 | | SURFACE FINISH | 125.0 MICROINCHES |
|
|