|
|
|
National Stock Number:
3040-01-176-2645
Federal Supply Class:
3040
National Item Identification Number:
011762645
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 707015 | 99167 | HAMILTON SUNDSTRAND CORPORATION |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 1.0500 INCHES NOMINAL | | FIRST END STYLE | PLAIN | | LARGEST STEP DIAMETER | 1.267 INCHES NOMINAL | | OVERALL LENGTH | 0.886 INCHES NOMINAL | | MATERIAL | STEEL | | SECOND END DIAMETER | 1.2670 INCHES NOMINAL | | SECOND END PITCH DIAMETER | 1.2000 INCHES NOMINAL | | SECOND END PRESSURE ANGLE | 30.0 DEGREES NOMINAL | | SECOND END SPLINE LENGTH | 0.605 INCHES NOMINAL | | SECOND END SPLINE MAJOR DIAMETER | 1.2670 INCHES NOMINAL | | SECOND END SPLINE MINOR DIAMETER | 1.0900 INCHES NOMINAL | | SECOND END SPLINE QUANTITY | 24 | | SECOND END STYLE | SPLINED (INVOLUTE) | | SPECIAL FEATURES | HOLE THRU LENGTH OF SHAFT 0.700 IN. ID; 2ND END HAS INTERNAL INVOLUTE SPLINES | | STEP QUANTITY | 3 | | SURFACE FINISH | 125.0 MICROINCHES |
|
|