|
|
|
National Stock Number:
3040-01-176-3566
Federal Supply Class:
3040
National Item Identification Number:
011763566
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 3886011-1 | 99193 | HONEYWELL INTERNATIONAL INC. |
|
Techincal Specification:
| CRITICALITY CODE JUSTIFICATION | FEAT | | END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 1.120 INCHES MINIMUM AND 1.125 INCHES MAXIMUM | | FIRST END PRESSURE ANGLE | 30.0 DEGREES NOMINAL | | OVERALL LENGTH | 5.805 INCHES MINIMUM AND 5.815 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6487 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SHAFT, CLUTCH | | SECOND END DIAMETER | 1.161 INCHES MINIMUM AND 1.163 INCHES MAXIMUM | | SECOND END PRESSURE ANGLE | 30.0 DEGREES NOMINAL | | SECOND END SPLINE MINOR DIAMETER | 1.000 INCHES MINIMUM AND 1.005 INCHES MAXIMUM | | SPECIAL FEATURES | NSN IS A CRITICAL APPLICATION ITEM (CAI) | | SPECIAL TEST FEATURES | MAGNETIC PARTICLE INSPEC PER AIRESEARCH EMS 52308, CLASS 2; HEAT TREAT BEFORE NITRIDING, PER AIRESEARCH HT5087, TYPE II; MATERIAL: STEEL H-11 PER AMS 6487 | | SUPPLEMENTARY FEATURES | EXTERNAL SPLINE: ASA-B5.15 1960 STANDARD INVOLUTE, 17 TEETH; DIAMETRAL PITCH: 16/32;PRESSURE ANGLE: 30 DEGREES; TYPE-FILLET ROOT SIDE FIT: CLASS 1; MINOR DIAMETER: .9265-.9375; MEASUREMENT OVER .1200 DIAMETER PINS; 1.2378 MAXIMUM, 1.2361 MINIMUM; CIRCULAR TOOTH THICKNESS WITH GAGE: .0967 MAXIMUM; TOOTH FACE WIDTH: .00007; PITCH DIAMETER: .0015; INTERNAL SPLINE: ASA-B5.15 1960 STANDARD INVOLUTE, 17 TEETH; DIAMETRAL PITCH: 16/32; PRESSURE ANGLE: 30 DEGREES; TYPE: FILLET ROOT SIDE FIT; MAJOR DIAMETER: 1.175-1.136; MEASUREMENT BETWEEN .1080 DIAMETER PINS, .9059 MAXIMUM; CIRCULAR SPACE WIDTH WITH GAGE: .0982 MINIMUM; TOOTH PARALLELISM: 1.000; PITCH DIAMETER: .002 CIRCULAR |
|
|