|
|
|
National Stock Number:
3040-01-179-6063
Federal Supply Class:
3040
National Item Identification Number:
011796063
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 006-NGC-004-300 | 10941 | CARVER PUMP COMPANY | | C-006-NGC-0-04-301 | 10941 | CARVER PUMP COMPANY | | D-006-NGC-0-01-320 | 10941 | CARVER PUMP COMPANY | | D-006-NGC-0-04-300 | 10941 | CARVER PUMP COMPANY | | D-006-NGC-0-04-301 | 10941 | CARVER PUMP COMPANY | | D-006-NGC-0-04-320 | 10941 | CARVER PUMP COMPANY | | F-NGC-0-99-022 ITEM 9 | 10941 | CARVER PUMP COMPANY | | FNDG0-99-002PC6 | 10941 | CARVER PUMP COMPANY | | FNGC0-96-007PC6 | 10941 | CARVER PUMP COMPANY |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | EXTERNAL KEYWAY LENGTH | 0.7187 INCHES NOMINAL SECOND END | | FIRST END DIAMETER | 1.0000 INCHES NOMINAL | | FIRST END EXTERNAL THREAD LENGTH | 0.625 INCHES NOMINAL | | FIRST END STYLE | EXTERNAL THREADED | | LARGEST STEP DIAMETER | 1.812 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-N-281,CLASS A ORB FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | NICKEL ALLOY | | OVERALL LENGTH | 33.000 INCHES NOMINAL | | SECOND END EXTERNAL THREAD LENGTH | 0.5000 INCHES NOMINAL | | SECOND END DIAMETER | 1.3719 INCHES NOMINAL | | SECOND END STYLE | EXTERNALLY THREADED AND FLAT KEYWAY | | SECOND END KEYWAY DEPTH | 0.1875 INCHES NOMINAL | | SECOND END KEYWAY WIDTH | 0.0937 INCHES NOMINAL | | STEP QUANTITY | 9 | | SURFACE FINISH | 32.0 MICROINCHES |
|
|