|
|
|
National Stock Number:
3040-01-181-3619
Federal Supply Class:
3040
National Item Identification Number:
011813619
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 1011504 | 11083 | CATERPILLAR INC | | 2G6571 | 11083 | CATERPILLAR INC |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 2.2188 INCHES NOMINAL | | FIRST END STYLE | PLAIN | | LARGEST STEP DIAMETER | 5.978 INCHES NOMINAL | | MATERIAL | STEEL | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 6.400 INCHES NOMINAL | | SECOND END DIAMETER | 2.3373 INCHES NOMINAL | | SECOND END DISTANCE FROM END TO GROOVE | 0.162 INCHES NOMINAL | | SECOND END GROOVE WIDTH | 0.1050 INCHES NOMINAL | | SECOND END HOLE DEPTH | 1.750 INCHES NOMINAL | | SECOND END HOLE DIAMETER | 0.2500 INCHES NOMINAL | | SECOND END DISTANCE FROM HOLE CENTER TO END | 3.300 INCHES NOMINAL | | SECOND END GROOVE DIAMETER | 1.0050 INCHES NOMINAL | | SECOND END STYLE | CROSS DRILLED AND CIRCULAR GROOVED | | STEP QUANTITY | 4 |
|
|