|
|
|
National Stock Number:
3040-01-187-2918
Federal Supply Class:
3040
National Item Identification Number:
011872918
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 5006959 | 03350 | GENERAL ELECTRIC COMPANY DBA GE STRUCTURED SERVICES DIV GENERAL ELECTRIC STRUCTURED SERVICES LP | | 5006959 | 99167 | HAMILTON SUNDSTRAND CORPORATION |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.5500 INCHES NOMINAL | | FIRST END PITCH DIAMETER | 0.8000 INCHES NOMINAL | | FIRST END PRESSURE ANGLE | 30.0 DEGREES NOMINAL | | FIRST END SPLINE LENGTH | 0.5500 INCHES NOMINAL | | FIRST END SPLINE MAJOR DIAMETER | 0.8500 INCHES NOMINAL | | FIRST END SPLINE MINOR DIAMETER | 0.7000 INCHES NOMINAL | | FIRST END SPLINE QUANTITY | 16 | | FIRST END STYLE | SPLINED (INVOLUTE) | | LARGEST STEP DIAMETER | 1.0000 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6470 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 5.210 INCHES NOMINAL | | SECOND END DIAMETER | 0.5500 INCHES NOMINAL | | SECOND END STYLE | SPLINED (INVOLUTE) | | SECOND END PITCH DIAMETER | 0.7000 INCHES NOMINAL | | SECOND END PRESSURE ANGLE | 30.0 DEGREES NOMINAL | | SECOND END SPLINE LENGTH | 0.6000 INCHES NOMINAL | | SECOND END SPLINE MAJOR DIAMETER | 0.7500 INCHES NOMINAL | | SECOND END SPLINE MINOR DIAMETER | 0.5890 INCHES NOMINAL | | SECOND END SPLINE QUANTITY | 14 | | SPECIAL FEATURES | END ITEM ACFT ENG F-101,FUEL PUMP 9959M68P06 | | STEP QUANTITY | 12 |
|
|