|
|
|
National Stock Number:
3040-01-191-6566
Federal Supply Class:
3040
National Item Identification Number:
011916566
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| V-6587 PIECE 3 | 53154 | PORTLAND VALVE LLC | | V-6676 | 53154 | PORTLAND VALVE LLC | | V-6676 ITEM 3 | 53154 | PORTLAND VALVE LLC | | V-6683 | 53154 | PORTLAND VALVE LLC |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 2.2500 INCHES NOMINAL | | FIRST END SPLINE LENGTH | 1.860 INCHES NOMINAL | | FIRST END SPLINE MAJOR DIAMETER | 2.2500 INCHES NOMINAL | | FIRST END SPLINE MINOR DIAMETER | 1.9350 INCHES NOMINAL | | FIRST END SPLINE QUANTITY | 10 | | FIRST END STYLE | SPLINED (STRAIGHT) | | LARGEST STEP DIAMETER | 2.765 INCHES NOMINAL | | MATERIAL | STEEL | | OVERALL LENGTH | 8.760 INCHES NOMINAL | | SECOND END DIAMETER | 2.7450 INCHES NOMINAL | | SECOND END STYLE | SLOTTED | | SECOND END SLOT DEPTH | 0.430 INCHES NOMINAL | | SECOND END SLOT WIDTH | 0.560 INCHES NOMINAL | | SPECIAL FEATURES | LEVER MACHINED ON SHAFT; 2.525 IN. FROM SECOND END; 4.700 IN. LG; 0.875 IN. W | | STEP QUANTITY | 8 | | SURFACE FINISH | 125.0 MICROINCHES |
|
|