|
|
|
National Stock Number:
3040-01-192-1407
Federal Supply Class:
3040
National Item Identification Number:
011921407
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 25-S60-111 | 97674 | CONE DRIVE OPERATIONS INC |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 2.6250 INCHES NOMINAL | | FIRST END STYLE | PLAIN | | LARGEST STEP DIAMETER | 2.741 INCHES NOMINAL | | MATERIAL | STEEL | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 5.812 INCHES NOMINAL | | SECOND END DIAMETER | 2.5930 INCHES NOMINAL | | SECOND END DISTANCE FROM HOLE CENTER TO END | 0.250 INCHES NOMINAL | | SECOND END STYLE | THREADED CROSS DRILLED (THRU HOLE) | | SPECIAL FEATURES | SECOND END ALSO CONTAINS A SECOND CROSS DRILLED HOLE,BOTH ARE THRU HOLES,0.250 IN.FROM CENTER TO END,THREADED,90 DEG APART | | STEP QUANTITY | 6 |
|
|