|
|
|
National Stock Number:
3040-01-192-7388
Federal Supply Class:
3040
National Item Identification Number:
011927388
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 3620156-1 | 99193 | HONEYWELL INTERNATIONAL INC. | | SS-3620156-1 | 59915 | SERVICE & SALES INC |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 1.8895 INCHES MINIMUM AND 1.8898 INCHES MAXIMUM | | FIRST END STYLE | PLAIN | | LARGEST STEP DIAMETER | 1.8895 INCHES MINIMUM AND 1.8898 INCHES MAXIMUM | | OVERALL LENGTH | 4.370 INCHES MINIMUM AND 4.380 INCHES MAXIMUM | | MATERIAL | STEEL | | SECOND END DIAMETER | 1.7100 INCHES MINIMUM AND 1.7200 INCHES MAXIMUM | | SECOND END PITCH DIAMETER | 1.7323 INCHES NOMINAL | | SECOND END PRESSURE ANGLE | 30.0 DEGREES NOMINAL | | SECOND END SPLINE LENGTH | 0.3000 INCHES MINIMUM AND 0.3600 INCHES MAXIMUM | | SECOND END SPLINE MAJOR DIAMETER | 1.7495 INCHES MINIMUM AND 1.7498 INCHES MAXIMUM | | SECOND END SPLINE MINOR DIAMETER | 1.7225 INCHES MINIMUM AND 1.7300 INCHES MAXIMUM | | SECOND END SPLINE QUANTITY | 29 | | SECOND END STYLE | SPLINED (INVOLUTE) | | SPECIAL FEATURES | FIRST END HAS 3 SIDED FLANGE WITH 1 HOLE 0.2505 IN. MIN AND 0.2513 IN. MAX DIA IN EACH POINT | | STEP QUANTITY | 9 |
|
|