|
|
|
National Stock Number:
3040-01-192-9681
Federal Supply Class:
3040
National Item Identification Number:
011929681
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 102-4426 | 61361 | REXWORKS INC | | 102-4428-1 | 61361 | REXWORKS INC |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 1.1814 INCHES NOMINAL | | FIRST END STYLE | PLAIN | | LARGEST STEP DIAMETER | 1.721 INCHES NOMINAL | | MATERIAL | STEEL | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 9.906 INCHES NOMINAL | | SECOND END DIAMETER | 1.4980 INCHES NOMINAL | | SECOND END ANGLE BETWEEN HOLES | 90.0 DEGREES NOMINAL | | SECOND END DISTANCE FROM HOLE CENTER TO END | 0.1875 INCHES NOMINAL | | SECOND END EXTERNAL THREAD LENGTH | 0.7500 INCHES NOMINAL | | SECOND END STYLE | TWO CROSS DRILLED HOLES AND EXTERNALLY THREADED | | STEP QUANTITY | 4 |
|
|