|
|
|
National Stock Number:
3040-01-194-1826
Federal Supply Class:
3040
National Item Identification Number:
011941826
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 0-080-000-52 PIECE 022 | 99193 | HONEYWELL INTERNATIONAL INC. | | 0-080-033X14 | 1N8S8 | VERICOR POWER SYSTEMS LLC | | 0-080-033X14 | 99193 | HONEYWELL INTERNATIONAL INC. |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 1.1620 INCHES NOMINAL | | FIRST END STYLE | PLAIN | | LARGEST STEP DIAMETER | 2.935 INCHES NOMINAL | | OVERALL LENGTH | 6.240 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6020 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | SECOND END DIAMETER | 1.1560 INCHES NOMINAL | | SECOND END STYLE | PLAIN | | SPECIAL FEATURES | FIRST END-ONE HOLE 0.620 IN. DIA,1.170 IN. DP;SECOND END-INTERNALLY SPLINED,16 TEETH,20/30DP,30 DEG PRESSURE ANGLE,0.800 IN. PD,0.735 IN. ID | | STEP QUANTITY | 7 | | SURFACE FINISH | 16.0 MICROINCHES |
|
|