|
|
|
National Stock Number:
3040-01-196-7507
Federal Supply Class:
3040
National Item Identification Number:
011967507
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 2254-4 ITEM 59 | 95402 | ELECTRIC BOAT CORP DBA ELECTRO DYNAMIC | | 325506-0-01 | 63743 | WARD LEONARD CT LLC | | 325506001 | 1Q8T8 | ALJERS LLC | | 325506-0-01 | 95402 | ELECTRIC BOAT CORP DBA ELECTRO DYNAMIC |
|
Techincal Specification:
| CRITICALITY CODE JUSTIFICATION | FEAT | | FIRST END DIAMETER | 0.6250 INCHES NOMINAL | | FIRST END EXTERNAL THREAD LENGTH | 1.187 INCHES NOMINAL | | FIRST END STYLE | EXTERNAL THREADED | | LARGEST STEP DIAMETER | 2.371 INCHES MINIMUM AND 2.372 INCHES MAXIMUM | | OVERALL LENGTH | 24.797 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-N-281,CLASS A,FORM 1 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | NICKEL ALLOY | | SPECIAL FEATURES | WEAPON SYSTEN ESSENTIAL | | STEP QUANTITY | 19 | | SURFACE FINISH | 32.0 MICROINCHES |
|
|