3040-01-208-9932, SHAFT,SHOULDERED

National Stock Number:
3040-01-208-9932

Federal Supply Class:
3040

National Item Identification Number:
012089932

Description:
SHAFT,SHOULDERED

Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.

Manufacturer Information:

3606293-1

99193

HONEYWELL INTERNATIONAL INC.

Techincal Specification:

END SIMILARITY	NOT IDENTICAL
FIRST END DIAMETER	0.7820 INCHES MINIMUM AND 0.8020 INCHES MAXIMUM
FIRST END PITCH DIAMETER	0.0015 INCHES NOMINAL
FIRST END PRESSURE ANGLE	30.0 DEGREES NOMINAL
FIRST END SPLINE LENGTH	0.5800 INCHES NOMINAL
FIRST END SPLINE MAJOR DIAMETER	0.8980 INCHES MINIMUM AND 0.9030 INCHES MAXIMUM
FIRST END SPLINE MINOR DIAMETER	0.8120 INCHES MINIMUM AND 0.8210 INCHES MAXIMUM
FIRST END SPLINE QUANTITY	21
FIRST END STYLE	SPLINED (INVOLUTE)
LARGEST STEP DIAMETER	1.200 INCHES MINIMUM AND 1.220 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 6487 ASSN STD SINGLE MATERIAL RESPONSE
MATERIAL	STEEL
PROPRIETARY CHARACTERISTICS	PACS
OVERALL LENGTH	9.130 INCHES NOMINAL
SECOND END DIAMETER	0.6600 INCHES MINIMUM AND 0.6800 INCHES MAXIMUM
SECOND END STYLE	SPLINED (INVOLUTE)
SECOND END PITCH DIAMETER	0.0015 INCHES NOMINAL
SECOND END PRESSURE ANGLE	30.0 DEGREES NOMINAL
SECOND END SPLINE LENGTH	0.6200 INCHES MINIMUM AND 0.6400 INCHES MAXIMUM
SECOND END SPLINE MAJOR DIAMETER	0.8435 INCHES MINIMUM AND 0.8485 INCHES MAXIMUM
SECOND END SPLINE MINOR DIAMETER	0.6900 INCHES MINIMUM AND 0.7000 INCHES MAXIMUM
SECOND END SPLINE QUANTITY	16
STEP QUANTITY	8

Click here to Register for Free 30-day Trial