|
|
|
National Stock Number:
3040-01-229-7352
Federal Supply Class:
3040
National Item Identification Number:
012297352
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 53-88069-3 | 76301 | THE BOEING COMPANY |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.3121 INCHES MINIMUM AND 0.3126 INCHES MAXIMUM | | FIRST END STYLE | PLAIN | | LARGEST STEP DIAMETER | 0.499 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763,CLASS 303,COND B FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 3.950 INCHES NOMINAL | | SECOND END DIAMETER | 0.4989 INCHES MINIMUM AND 0.4994 INCHES MAXIMUM | | SECOND END INTERNAL THREAD LENGTH | 0.500 INCHES NOMINAL | | SECOND END STYLE | INTERNAL THREADED | | SPECIAL FEATURES | FIRST END CHAMFERED 0.060 IN. BY 45 DEG,BOTH CORNERS AND INCLUDES 1 HOLE ALONG LGTH 0.094 IN. MIN TO 0.097 MAX DIA; 0.480 IN. FROM HOLE CENTER TO END | | STEP QUANTITY | 1 | | SUPPLEMENTARY FEATURES | NEXT ASSY P/N 53-88047,FSCM 76301 |
|
|