|
|
|
National Stock Number:
3040-01-230-3715
Federal Supply Class:
3040
National Item Identification Number:
012303715
Description:
SHAFT,STRAIGHT
Detail:
A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for jubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
|
Manufacturer Information:
| 2-600-211-281 | 63097 | VIKING PUMP, INC | | 2-600-211-314-00 | 63097 | VIKING PUMP, INC | | 2AL658 | 45152 | OSHKOSH CORP | | G0510-1852-027 | 63097 | VIKING PUMP, INC | | G0510-1852-027 ITEM 7 | 63097 | VIKING PUMP, INC | | 2AL658 | 75Q65 | OSHKOSH DEFENSE LLC |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.4995 INCHES NOMINAL | | FIRST END TONGUE THICKNESS | 0.247 INCHES NOMINAL | | FIRST END TONGUE WIDTH | 0.499 INCHES NOMINAL | | FIRST END STEP LENGTH | 0.380 INCHES NOMINAL | | FIRST END STYLE | TONGUE | | MATERIAL | STEEL | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 4.562 INCHES NOMINAL | | SECOND END DIAMETER | 0.5000 INCHES NOMINAL | | SECOND END HOLE DEPTH | 0.062 INCHES NOMINAL | | SECOND END HOLE DIAMETER | 0.1285 INCHES NOMINAL | | SECOND END DISTANCE FROM HOLE CENTER TO END | 1.188 INCHES NOMINAL | | SECOND END STYLE | UNTHREADED CROSS DRILLED |
|
|