|
|
|
National Stock Number:
3040-01-262-6973
Federal Supply Class:
3040
National Item Identification Number:
012626973
Description:
COLLAR,SHAFT
Detail:
An item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
|
Manufacturer Information:
| 437813-1 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER |
|
Techincal Specification:
| BORE DIAMETER | 1.1300 INCHES MINIMUM AND 1.1350 INCHES MAXIMUM | | LARGEST DIAMETER LENGTH | 0.173 INCHES MINIMUM AND 0.205 INCHES MAXIMUM | | OUTSIDE DIAMETER | 1.875 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | FED STD 66 FED STD SINGLE MATERIAL RESPONSE OR AISI ASSN STD SINGLE MATERIAL RESPONSE OR SAE 1118 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 1118 | | NOMINAL THREAD SIZE | 0.250 INCHES ALL HOLES | | SCREW THREAD SERIES DESIGNATOR AND LOCATION | ALL HOLES UNC | | SECURING HOLE QUANTITY | 2 | | SECURING HOLE TYPE AND LOCATION | THREADED ALL HOLES | | THICKNESS | 0.609 INCHES MINIMUM AND 0.640 INCHES MAXIMUM |
|
|