| DESIGN CHARACTERISTICS | SINGLE ACTING SINGLE CYLINDER |
| BODY MATERIAL | STEEL |
| BORE DIAMETER | 2.000 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING PROVISIONS | 0.938 INCHES NOMINAL |
| COMPRESSED LENGTH | 83.875 INCHES NOMINAL |
| EXTENDED LENGTH | 160.875 INCHES NOMINAL |
| FIRST END EXTERNAL THREAD LENGTH | 1.625 INCHES NOMINAL ALL WORKING ENDS |
| FIRST END OUTSIDE DIAMETER | 1.375 INCHES NOMINAL ALL WORKING ENDS |
| FIRST PISTON ROD END STYLE | EXTERNAL THREADED ALL WORKING ENDS |
| FIRST PISTON ROD END THREAD CLASS | 3A ALL WORKING ENDS |
| FIRST PISTON ROD END THREAD DIAMETER | 1.000 INCHES NOMINAL ALL WORKING ENDS |
| FIRST PISTON ROD END THREAD DIRECTION | RIGHT-HAND ALL WORKING ENDS |
| FIRST PISTON ROD END THREAD QUANTITY PER INCH | 14 ALL WORKING ENDS |
| FIRST PISTON ROD END THREAD SERIES DESIGNATOR | UNJ ALL WORKING ENDS |
| INTEGRAL VALVE OPERATION METHOD | HYDRAULIC |
| PORT LOCATION AND QUANTITY | 1 CYLINDER HEAD END AND 1 PISTON ROD END |
| PORT STYLE | GASKET SEAL ALL PORTS |
| PORT THREAD CLASS | 2B ALL PORTS |
| PORT THREAD DIAMETER | 0.875 INCHES NOMINAL ALL PORTS |
| PORT THREAD QUANTITY PER INCH | 14 ALL PORTS |
| PORT THREAD SERIES DESIGNATOR | UNF ALL PORTS |
| PRESSURE RATING | 3000.0 POUNDS PER SQUARE INCH NOMINAL |
| PROPRIETARY CHARACTERISTICS | PACS |
| MOUNTING FACILITY THREAD DIAMETER | 0.500 INCHES NOMINAL |
| MOUNTING FACILITY THREAD CLASS | 2B |
| MOUNTING FACILITY THREAD DIRECTION | RIGHT-HAND |
| MOUNTING FACILITY THREAD LENGTH | 0.438 INCHES NOMINAL |
| MOUNTING FACILITY THREAD QUANTITY PER INCH | 13 |
| MOUNTING FACILITY THREAD SERIES DESIGNATOR | UNF |
| MOUNTING FACILITY DIAMETER | 0.562 INCHES NOMINAL |
| MOUNTING PROVISION ARRANGEMENT STYLE | TWO HOLE |
| MOUNTING PROVISION | THREADED MOUNTING HOLES AND UNTHREADED MOUNTING HOLES |
| MOUNTING TYPE AND LOCATION | FLANGE CYLINDER HEAD END AND LUG CYLINDER BASE |
| SPECIAL FEATURES | 4 UNTHREADED MOUNTING HOLES IN FLANGE RECTANGULAR ARRANGEMENT 4.128IN. HORIZONTAL 2.050IN. VERTICALSPACING |