|
|
|
National Stock Number:
3040-01-282-1738
Federal Supply Class:
3040
National Item Identification Number:
012821738
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 312 1135 193 | 13829 | PARKER HANNIFIN CORPORATION | | 9-632-101334 | 12361 | GROVE U.S. LLC |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END EXTERNAL KEYWAY LENGTH | 2.0300 INCHES NOMINAL | | FIRST END DIAMETER | 0.9990 INCHES NOMINAL | | FIRST END KEYWAY DEPTH | 0.1280 INCHES NOMINAL | | FIRST END KEYWAY WIDTH | 0.2520 INCHES NOMINAL | | FIRST END STYLE | FLAT KEYWAY | | LARGEST STEP DIAMETER | 1.188 INCHES NOMINAL | | MATERIAL | STEEL COMP 8620 | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 5.984 INCHES NOMINAL | | SECOND END DIAMETER | 0.7204 INCHES NOMINAL | | SECOND END STYLE | SPLINED (INVOLUTE) | | SECOND END PITCH DIAMETER | 0.7083 INCHES NOMINAL | | SECOND END PRESSURE ANGLE | 30.0 DEGREES NOMINAL | | SECOND END SPLINE LENGTH | 1.5940 INCHES NOMINAL | | SECOND END SPLINE MAJOR DIAMETER | 0.7179 INCHES NOMINAL | | SECOND END SPLINE MINOR DIAMETER | 0.6453 INCHES NOMINAL | | SECOND END SPLINE QUANTITY | 17 | | STEP QUANTITY | 4 |
|
|