| BODY MATERIAL | STEEL CORROSION RESISTING |
| BORE DIAMETER | 1.062 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING PROVISIONS | 2.880 INCHES NOMINAL |
| COMPRESSED LENGTH | 6.120 INCHES NOMINAL |
| DESIGN CHARACTERISTICS | DOUBLE ACTING SINGLE CYLINDER |
| EXTENDED LENGTH | 8.120 INCHES NOMINAL |
| FIRST END EXTERNAL THREAD LENGTH | 0.500 INCHES NOMINAL ALL WORKING ENDS |
| FIRST END OUTSIDE DIAMETER | 0.312 INCHES NOMINAL ALL WORKING ENDS |
| FIRST PISTON ROD END STYLE | EXTERNAL THREADED ALL WORKING ENDS |
| FIRST PISTON ROD END THREAD CLASS | 2A ALL WORKING ENDS |
| FIRST PISTON ROD END THREAD DIAMETER | 0.312 INCHES NOMINAL ALL WORKING ENDS |
| FIRST PISTON ROD END THREAD QUANTITY PER INCH | 24 ALL WORKING ENDS |
| FIRST PISTON ROD END THREAD SERIES DESIGNATOR | UNF ALL WORKING ENDS |
| INTEGRAL VALVE OPERATION METHOD | PNEUMATIC |
| OVERALL DIAMETER | 1.120 INCHES NOMINAL |
| MOUNTING FACILITY LENGTH | 0.620 INCHES NOMINAL |
| MOUNTING FACILITY THREAD CLASS | 2A |
| MOUNTING FACILITY THREAD DIRECTION | RIGHT-HAND |
| MOUNTING FACILITY THREAD DIAMETER | 0.625 INCHES NOMINAL |
| MOUNTING FACILITY THREAD LENGTH | 0.500 INCHES NOMINAL |
| MOUNTING FACILITY THREAD SERIES DESIGNATOR | UNF |
| MOUNTING FACILITY THREAD QUANTITY PER INCH | 18 |
| MOUNTING PROVISION ARRANGEMENT STYLE | TWO STUD |
| MOUNTING PROVISION FOR WHICH DESIGNED | THREADED MOUNTING STUDS |
| MOUNTING TYPE AND LOCATION | STUD BOTH ENDS |
| PORT NOMINAL PIPE THREAD SIZE | 0.125 INCHES ALL PORTS |
| PORT STYLE | FLARE ALL PORTS |
| PORT THREAD SERIES DESIGNATOR | NPT ALL PORTS |
| PRESSURE RATING | 250.0 POUNDS PER SQUARE INCH NOMINAL |
| SEAT ANGLE IN DEG | 37.0 ALL PORTS |