|
|
|
National Stock Number:
3040-01-284-4549
Federal Supply Class:
3040
National Item Identification Number:
012844549
Description:
LEVER,REMOTE CONTROL
Detail:
A rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
|
Manufacturer Information:
| 013373-00D0 | 44185 | TLD WOLLARD LLC |
|
Techincal Specification:
| SHAFT END THICKNESS | 1.570 INCHES NOMINAL | | SPECIAL FEATURES | TOOTH SHAPED NOTCH ONPERIMETER OF SHAFT END,180 DEG FROM LINK HOLE,0.620 IN.DP,0.400 IN.W AT BOTTOM,15 DEG SIDE WALL ANGLE;4 SQUARE PROTRUSIONS EQ SPACED ABOUT HUB,0.496 IN.W BY 1.375 IN.LG;LINK HOLE TAPERED AT 1.500/FT; OFFSET HEIGHT: 1.740 IN. NOMINAL | | SURFACE TREATMENT | PHOSPHATE | | BORE DIAMETER | 1.752 INCHES MINIMUM AND 1.757 INCHES MAXIMUM | | BORE LENGTH | 3.070 INCHES NOMINAL | | BORE TYPE | PLAIN STRAIGHT | | CENTER TO CENTER DISTANCE BETWEEN LINK AND SHAFT HOLES | 6.500 INCHES NOMINAL | | LINK END HOLE DIAMETER | 0.885 INCHES NOMINAL | | LINK END THICKNESS | 1.330 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | AISI 4140 ASSN STD SINGLE MATERIAL RESPONSE | | III MATERIAL | STEEL | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL WIDTH | 6.000 INCHES NOMINAL |
|
|