|
|
|
National Stock Number:
3040-01-286-0120
Federal Supply Class:
3040
National Item Identification Number:
012860120
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 157D3642 | 05606 | GENERAL DYNAMICS-OTS, INC. |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.6242 INCHES NOMINAL | | FIRST END SPLINE LENGTH | 1.2000 INCHES NOMINAL | | FIRST END SPLINE MAJOR DIAMETER | 0.6242 INCHES NOMINAL | | FIRST END SPLINE MINOR DIAMETER | 0.5190 INCHES NOMINAL | | FIRST END SPLINE QUANTITY | 19 | | FIRST END STYLE | SPLINED (STRAIGHT) | | LARGEST STEP DIAMETER | 0.750 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS5643 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 17-4PH | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 9.170 INCHES NOMINAL | | SECOND END DIAMETER | 0.6242 INCHES NOMINAL | | SECOND END HOLE DIAMETER | 0.1905 INCHES NOMINAL | | SECOND END DISTANCE FROM HOLE CENTER TO END | 0.2700 INCHES NOMINAL | | SECOND END STYLE | UNTHREADED CROSS DRILLED | | SPECIAL FEATURES | FIRST END INTERNAL THD 1/4-28UNF-2B X 0.410 IN.DP,DRILLED HOLE 0.680 IN.DP | | STEP QUANTITY | 5 | | SURFACE FINISH | 125.0 MICROINCHES |
|
|