|
|
|
National Stock Number:
3040-01-286-9385
Federal Supply Class:
3040
National Item Identification Number:
012869385
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 853841 | 61724 | VOLVO PENTA OF THE AMERICAS INC | | 853841 | FAP33 | ETABLISSEMENTS LE POCHER | | 853841-5 | 61724 | VOLVO PENTA OF THE AMERICAS INC | | FS0001050 | FAGG5 | MN/SSF MARINE NATIONALE / SERVICE DE SOUTIEN DE LA FLOTTE |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 39.29 MILLIMETERS NOMINAL | | FIRST END PITCH DIAMETER | 33.02 MILLIMETERS NOMINAL | | FIRST END PRESSURE ANGLE | 30.0 DEGREES NOMINAL | | FIRST END SPLINE LENGTH | 26.0 MILLIMETERS NOMINAL | | FIRST END SPLINE MAJOR DIAMETER | 39.29 MILLIMETERS NOMINAL | | FIRST END SPLINE MINOR DIAMETER | 31.65 MILLIMETERS NOMINAL | | FIRST END SPLINE QUANTITY | 26 | | FIRST END STYLE | SPLINED (INVOLUTE) | | LARGEST STEP DIAMETER | 35.0 MILLIMETERS NOMINAL | | MATERIAL | STEEL | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 226.0 MILLIMETERS NOMINAL | | SECOND END DIAMETER | 28.575 MILLIMETERS NOMINAL | | SECOND END STYLE | SPLINED (INVOLUTE) | | SECOND END PITCH DIAMETER | 27.516 MILLIMETERS NOMINAL | | SECOND END PRESSURE ANGLE | 30.0 DEGREES NOMINAL | | SECOND END SPLINE LENGTH | 53.0 MILLIMETERS NOMINAL | | SECOND END SPLINE MAJOR DIAMETER | 28.575 MILLIMETERS NOMINAL | | SECOND END SPLINE MINOR DIAMETER | 26.36 MILLIMETERS NOMINAL | | SECOND END SPLINE QUANTITY | 26 | | STEP QUANTITY | 4 | | SURFACE FINISH | 6.3 MICROINCHES |
|
|