|
|
|
National Stock Number:
3040-01-289-8304
Federal Supply Class:
3040
National Item Identification Number:
012898304
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 4760090 | 80064 | NAVAL SHIP SYSTEMS COMMAND | | 4760090 PART 4 | 80064 | NAVAL SHIP SYSTEMS COMMAND | | 4760090-4 | 80064 | NAVAL SHIP SYSTEMS COMMAND |
|
Techincal Specification:
| END SIMILARITY | IDENTICAL | | FIRST END DIAMETER | 1.4800 INCHES MINIMUM AND 1.4850 INCHES MAXIMUM | | FIRST END PITCH DIAMETER | 1.4000 INCHES NOMINAL | | FIRST END PRESSURE ANGLE | 30.0 DEGREES NOMINAL | | FIRST END SPLINE LENGTH | 7.147 INCHES NOMINAL | | FIRST END SPLINE MAJOR DIAMETER | 1.4800 INCHES MINIMUM AND 1.4850 INCHES MAXIMUM | | FIRST END SPLINE MINOR DIAMETER | 1.2610 INCHES MINIMUM AND 1.2760 INCHES MAXIMUM | | FIRST END SPLINE QUANTITY | 14 | | FIRST END STYLE | SPLINED (INVOLUTE) | | LARGEST STEP DIAMETER | 1.622 INCHES NOMINAL | | OVERALL LENGTH | 10.650 INCHES MINIMUM AND 10.660 INCHES MAXIMUM | | MATERIAL | STEEL COMP 4130 | | STEP QUANTITY | 5 | | SURFACE FINISH | 32.0 MICROINCHES |
|
|