|
|
|
National Stock Number:
3040-01-291-8214
Federal Supply Class:
3040
National Item Identification Number:
012918214
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 10497854 | 077S2 | DELCO REMY AMERICA INC | | 10497854 | 16764 | GENERAL MOTORS CORP DELCO REMY DIV | | A187739 | 10988 | CNH INDUSTRIAL AMERICA LLC |
|
Techincal Specification:
| FIRST END DISTANCE FROM END TO GROOVE | 1.875 MILLIMETERS NOMINAL | | FIRST END GROOVE DIAMETER | 6.995 MILLIMETERS NOMINAL | | FIRST END GROOVE WIDTH | 2.425 MILLIMETERS NOMINAL | | FIRST END STYLE | CIRCULAR GROOVED | | LARGEST STEP DIAMETER | 12.7 MILLIMETERS NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | AISI 12L15 FED STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 43.0 MILLIMETERS NOMINAL | | SECOND END DIAMETER | 12.7 MILLIMETERS NOMINAL | | SECOND END GROOVE DIAMETER | 10.175 MILLIMETERS NOMINAL | | SECOND END GROOVE WIDTH | 2.425 MILLIMETERS NOMINAL | | SECOND END DISTANCE FROM END TO GROOVE | 1.775 MILLIMETERS NOMINAL | | SECOND END STYLE | CIRCULAR GROOVED | | STEP QUANTITY | 2 | | END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 9.49 MILLIMETERS NOMINAL |
|
|