|
|
|
National Stock Number:
3040-01-292-2510
Federal Supply Class:
3040
National Item Identification Number:
012922510
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| A1730 | 52906 | EATON AEROSPACE LLC STERER ENGINEERING MORGAN ACTUATORS | | A1730-2 | 52906 | EATON AEROSPACE LLC STERER ENGINEERING MORGAN ACTUATORS |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DISTANCE FROM HOLE CENTER TO END | 0.6120 INCHES NOMINAL | | FIRST END DIAMETER | 0.4970 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM | | FIRST END HOLE DIAMETER | 0.1695 INCHES NOMINAL | | FIRST END STYLE | UNTHREADED CROSS DRILLED | | LARGEST STEP DIAMETER | 0.747 INCHES MINIMUM AND 0.748 INCHES MAXIMUM | | MATERIAL | STEEL CORROSION RESISTING | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 3.880 INCHES NOMINAL | | SECOND END DIAMETER | 0.7475 INCHES NOMINAL | | SECOND END INTERNAL THREAD LENGTH | 0.5000 INCHES NOMINAL | | SECOND END STYLE | SQUARE AND INTERNALLY THREADED | | SECOND END WIDTH ACROSS FLATS | 0.4950 INCHES MINIMUM AND 0.4980 INCHES MAXIMUM | | SECOND END STEP LENGTH | 1.0000 INCHES NOMINAL | | STEP QUANTITY | 3 |
|
|