|
|
|
National Stock Number:
3040-01-297-0282
Federal Supply Class:
3040
National Item Identification Number:
012970282
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 754/2/36185/000 | 16236 | DLA LAND AND MARITIME DBA ENGINEERING AND TECHNICAL SUPPORT DIV DOCUMENT STANDARDIZATION DIVISION (VENDOR ITEM DRAWINGS) | | 754/2/36185/000 | K2523 | EATON LIMITED |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.4380 INCHES NOMINAL | | FIRST END EXTERNAL THREAD LENGTH | 0.4330 INCHES NOMINAL | | FIRST END STYLE | EXTERNAL THREADED | | LARGEST STEP DIAMETER | 1.0240 INCHES NOMINAL | | OVERALL LENGTH | 4.5130 INCHES NOMINAL | | MATERIAL | STEEL | | SECOND END DIAMETER | 0.6220 INCHES NOMINAL | | SECOND END PITCH DIAMETER | 0.6000 INCHES NOMINAL | | SECOND END PRESSURE ANGLE | 30.0 DEGREES NOMINAL | | SECOND END SPLINE LENGTH | 0.6100 INCHES NOMINAL | | SECOND END SPLINE MAJOR DIAMETER | 0.6220 INCHES NOMINAL | | SECOND END SPLINE MINOR DIAMETER | 0.5625 INCHES NOMINAL | | SECOND END SPLINE QUANTITY | 29 | | SECOND END STYLE | SPLINED (INVOLUTE) | | STEP QUANTITY | 11 | | SPECIAL FEATURES | ROUNDED GROOVE LOCATED SECOND END MIDDLE OF SPLINES,0.300 IN. FROM END OF SHAFT TO MIDDLE OF GROOVE |
|
|