|
|
|
National Stock Number:
3040-01-301-4654
Federal Supply Class:
3040
National Item Identification Number:
013014654
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 014-08173W PIECE 6 | 9F512 | PARKER-HANNIFIN CORPORATION | | 034-28380-Y | 9F512 | PARKER-HANNIFIN CORPORATION |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DISTANCE FROM HOLE CENTER TO END | 0.5000 INCHES NOMINAL | | FIRST END DIAMETER | 0.7490 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM | | FIRST END HOLE DIAMETER | 0.3120 INCHES NOMINAL | | FIRST END STYLE | UNTHREADED CROSS DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-624 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 4140 |
|
|