|
|
|
National Stock Number:
3040-01-302-2994
Federal Supply Class:
3040
National Item Identification Number:
013022994
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 22086 | 93835 | PARKER HANNIFIN CORPORATION |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 1.2500 INCHES NOMINAL | | FIRST END PITCH DIAMETER | 1.2000 INCHES NOMINAL | | FIRST END PRESSURE ANGLE | 30.0 DEGREES NOMINAL | | FIRST END SPLINE LENGTH | 1.0100 INCHES NOMINAL | | FIRST END SPLINE MAJOR DIAMETER | 1.2450 INCHES MINIMUM AND 1.2500 INCHES MAXIMUM | | FIRST END SPLINE MINOR DIAMETER | 1.0812 INCHES MINIMUM AND 1.0912 INCHES MAXIMUM | | FIRST END SPLINE QUANTITY | 24 | | FIRST END STYLE | SPLINED (INVOLUTE) | | LARGEST STEP DIAMETER | 1.353 INCHES MINIMUM AND 1.355 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 17-4PH | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 3.140 INCHES NOMINAL | | SECOND END DIAMETER | 0.9743 INCHES MINIMUM AND 0.9793 INCHES MAXIMUM | | SECOND END STYLE | SPLINED (INVOLUTE) | | SECOND END PITCH DIAMETER | 0.9167 INCHES NOMINAL | | SECOND END PRESSURE ANGLE | 30.0 DEGREES NOMINAL | | SECOND END SPLINE LENGTH | 1.0600 INCHES NOMINAL | | SECOND END SPLINE MAJOR DIAMETER | 0.9743 INCHES MINIMUM AND 0.9793 INCHES MAXIMUM | | SECOND END SPLINE MINOR DIAMETER | 0.7997 INCHES MINIMUM AND 0.8127 INCHES MAXIMUM | | SECOND END SPLINE QUANTITY | 11 | | STEP QUANTITY | 9 |
|
|