|
|
|
National Stock Number:
3040-01-305-5823
Federal Supply Class:
3040
National Item Identification Number:
013055823
Description:
SHAFT,STRAIGHT
Detail:
A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for jubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
|
Manufacturer Information:
| 726-235-001 | 26055 | PARKER-HANNIFIN CORPORATION | | 726-235-001 | 59211 | PARKER-HANNIFIN CORPORATION |
|
Techincal Specification:
| END SIMILARITY | IDENTICAL | | FIRST END DISTANCE BETWEEN FIRST AND SECOND GROOVE CENTERS | 0.082 INCHES NOMINAL | | FIRST END DISTANCE BETWEEN SECOND AND THIRD GROOVE CENTERS | 0.296 INCHES NOMINAL | | FIRST END DISTANCE FROM END TO GROOVE | 0.061 INCHES NOMINAL | | FIRST END DIAMETER | 0.0622 INCHES NOMINAL | | FIRST END GROOVE DIAMETER | 0.0520 INCHES NOMINAL | | FIRST END GROOVE WIDTH | 0.0120 INCHES NOMINAL | | FIRST END STYLE | THREE CIRCULAR GROOVES | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763,CL303 COND A FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL CORROSION RESISTING | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 2.120 INCHES NOMINAL | | SPECIAL FEATURES | W/TEN GROOVES | | SURFACE FINISH | 10.0 MICROINCHES |
|
|