|
|
|
National Stock Number:
3040-01-305-9855
Federal Supply Class:
3040
National Item Identification Number:
013059855
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 726-074-001 | 26055 | PARKER-HANNIFIN CORPORATION | | 726-074-001 | 59211 | PARKER-HANNIFIN CORPORATION |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.0930 INCHES NOMINAL | | FIRST END STYLE | PLAIN | | LARGEST STEP DIAMETER | 0.3000 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763,CLASS 303 COND A FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL CORROSION RESISTING | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 1.0950 INCHES NOMINAL | | SECOND END DIAMETER | 0.0930 INCHES NOMINAL | | SECOND END STYLE | SLOTTED | | SECOND END SLOT DEPTH | 0.0400 INCHES NOMINAL | | SECOND END SLOT WIDTH | 0.0300 INCHES NOMINAL | | SPECIAL FEATURES | FIRST END FINE STRAIGHT KNURL 0.180IN. LG,USED ON LIQUID QUANTITY INDICATOR MH53E P/N 357-022-001 | | STEP QUANTITY | 8 | | SURFACE FINISH | 32.0 MICROINCHES |
|
|