|
|
|
National Stock Number:
3040-01-306-6927
Federal Supply Class:
3040
National Item Identification Number:
013066927
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 10029037-2 | 05606 | GENERAL DYNAMICS-OTS, INC. |
|
Techincal Specification:
| END SIMILARITY | IDENTICAL | | FIRST END DIAMETER | 0.3750 INCHES NOMINAL | | FIRST END EXTERNAL THREAD LENGTH | 0.3600 INCHES NOMINAL | | FIRST END STYLE | EXTERNAL THREADED | | LARGEST STEP DIAMETER | 0.5142 INCHES NOMINAL | | OVERALL LENGTH | 8.790 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM-322 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | STEP QUANTITY | 10 | | SPECIAL FEATURES | SHAFT HAS TWO SPLINES,FIRST END SPLINE HAS 19 TEETH,PRESS. ANGLE 30 DEG.,5.630 IN. LG.;SECOND END SPLINE HAS 15 TEETH,PRESS. ANGLE 30 DEG.,0.630 IN. LG. | | SURFACE FINISH | 250.0 MICROINCHES |
|
|