|
|
|
National Stock Number:
3040-01-308-5435
Federal Supply Class:
3040
National Item Identification Number:
013085435
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 10029079-2 | 05606 | GENERAL DYNAMICS-OTS, INC. |
|
Techincal Specification:
| END SIMILARITY | IDENTICAL | | FIRST END EXTERNAL THREAD LENGTH | 0.3600 INCHES NOMINAL | | FIRST END DIAMETER | 0.3750 INCHES NOMINAL | | FIRST END STYLE | EXTERNAL THREADED | | LARGEST STEP DIAMETER | 0.6235 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM-A322 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | OVERALL LENGTH | 9.800 INCHES NOMINAL | | SPECIAL FEATURES | SHAFT HAS TWO SPLINES,FIRST STARTS 1.080 IN. FROM FIRST END. HAS 19 TEETH,PRESSURE ANGLE 30.0 DEG.,BASE DIA 0.5142.SECOND SPLINE 0.090 IN. FROM SECOND END.SPLINE HAS 15 TEETH,PRESSURE ANGLE 30.0 DEG.,BASE DIA. 0.4059 IN. | | STEP QUANTITY | 11 | | SURFACE FINISH | 250.0 MICROINCHES |
|
|