|
|
|
National Stock Number:
3040-01-310-6179
Federal Supply Class:
3040
National Item Identification Number:
013106179
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 31W-0032 | 44114 | BAE SYSTEMS LAND & ARMAMENTS L.P. |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 1.5012 INCHES NOMINAL | | FIRST END STYLE | PLAIN | | LARGEST STEP DIAMETER | 3.8750 INCHES NOMINAL | | MATERIAL | STEEL | | OVERALL LENGTH | 3.750 INCHES NOMINAL | | SECOND END DISTANCE FROM END TO GROOVE | 0.4370 INCHES NOMINAL | | SECOND END GROOVE DIAMETER | 2.8750 INCHES NOMINAL | | SECOND END GROOVE WIDTH | 0.6250 INCHES NOMINAL | | SECOND END DIAMETER | 3.8750 INCHES NOMINAL | | SECOND END STYLE | CIRCULAR GROOVED | | SPECIAL FEATURES | SECOND END HAS 4 HOLES EQUALLY SPACED AT 3.425 IN. DIA,SECOND END ALSO HAS 8 SLOTS EQUALLY SPACED AT 3.875 IN. DIA. | | STEP QUANTITY | 8 |
|
|