|
|
|
National Stock Number:
3040-01-328-2884
Federal Supply Class:
3040
National Item Identification Number:
013282884
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 2227050 | 93835 | PARKER HANNIFIN CORPORATION | | 2227050-11 | 59211 | PARKER-HANNIFIN CORPORATION | | 2227050-11 | 82106 | PARKER-HANNIFIN CORPORATION | | 2227050-11 | 93835 | PARKER HANNIFIN CORPORATION |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.2497 INCHES MINIMUM AND 0.2499 INCHES MAXIMUM | | FIRST END STYLE | PLAIN | | LARGEST STEP DIAMETER | 0.497 INCHES NOMINAL | | MATERIAL | STEEL CORROSION RESISTING | | PROPRIETARY CHARACTERISTICS | PACS | | SECOND END DIAMETER | 0.2550 INCHES MINIMUM AND 0.2900 INCHES MAXIMUM | | SECOND END HOLE DIAMETER | 0.0760 INCHES MINIMUM AND 0.0860 INCHES MAXIMUM | | SECOND END DISTANCE FROM HOLE CENTER TO END | 0.0950 INCHES NOMINAL | | SECOND END STYLE | CROSS DRILLED AND EXTERNALLY THREADED | | SPECIAL FEATURES | FIRST END AND LARGEST STEP ARE SPHERICAL | | STEP QUANTITY | 6 |
|
|