|
|
|
National Stock Number:
3040-01-328-8638
Federal Supply Class:
3040
National Item Identification Number:
013288638
Description:
SHAFT,STRAIGHT
Detail:
A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for jubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
|
Manufacturer Information:
| D10773 | R1775 | DANISH AEROTECH A/S | | D10773 | R3504 | DANISH AEROTECH A/S | | D10773-001 | 16236 | DLA LAND AND MARITIME DBA ENGINEERING AND TECHNICAL SUPPORT DIV DOCUMENT STANDARDIZATION DIVISION (VENDOR ITEM DRAWINGS) | | D10773-001 | R1775 | DANISH AEROTECH A/S | | D10773-001 | R3504 | DANISH AEROTECH A/S |
|
Techincal Specification:
| END SIMILARITY | IDENTICAL | | FIRST END DIAMETER | 0.7869 INCHES MINIMUM AND 0.7874 INCHES MAXIMUM | | FIRST END DISTANCE FROM END TO GROOVE | 0.028 INCHES MINIMUM AND 0.051 INCHES MAXIMUM | | FIRST END GROOVE DIAMETER | 0.7422 INCHES MINIMUM AND 0.7480 INCHES MAXIMUM | | FIRST END GROOVE WIDTH | 0.0512 INCHES MINIMUM AND 0.0590 INCHES MAXIMUM | | FIRST END STYLE | CIRCULAR GROOVED | | OVERALL LENGTH | 2.264 INCHES MINIMUM AND 2.283 INCHES MAXIMUM |
|
|