|
|
|
National Stock Number:
3040-01-330-7800
Federal Supply Class:
3040
National Item Identification Number:
013307800
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 5061T13P01 | 03350 | GENERAL ELECTRIC COMPANY DBA GE STRUCTURED SERVICES DIV GENERAL ELECTRIC STRUCTURED SERVICES LP | | 5061T13P01 | 22819 | BOEING DISTRIBUTION, INC. | | 5061T13P01 | 99207 | GENERAL ELECTRIC COMPANY | | 55061T13P01 | 99207 | GENERAL ELECTRIC COMPANY |
|
Techincal Specification:
| END SIMILARITY | IDENTICAL | | FIRST END DIAMETER | 0.5250 INCHES NOMINAL | | FIRST END PITCH DIAMETER | 0.6250 INCHES NOMINAL | | FIRST END PRESSURE ANGLE | 30.0 DEGREES NOMINAL | | FIRST END SPLINE LENGTH | 0.8300 INCHES NOMINAL | | FIRST END SPLINE MAJOR DIAMETER | 0.6650 INCHES NOMINAL | | FIRST END SPLINE MINOR DIAMETER | 0.6200 INCHES NOMINAL | | FIRST END SPLINE QUANTITY | 15 | | FIRST END STYLE | SPLINED (INVOLUTE) | | LARGEST STEP DIAMETER | 0.625 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS-6265 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | OVERALL LENGTH | 5.830 INCHES NOMINAL | | STEP QUANTITY | 11 |
|
|