|
|
|
National Stock Number:
3040-01-331-1709
Federal Supply Class:
3040
National Item Identification Number:
013311709
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| M10785 | 16236 | DLA LAND AND MARITIME DBA ENGINEERING AND TECHNICAL SUPPORT DIV DOCUMENT STANDARDIZATION DIVISION (VENDOR ITEM DRAWINGS) | | M10785 | K8744 | GODIVA LIMITED DBA GODIVA |
|
Techincal Specification:
| SECOND END DIAMETER | 0.9433 INCHES MINIMUM AND 0.9443 INCHES MAXIMUM | | SECOND END INTERNAL THREAD LENGTH | 0.669 INCHES NOMINAL | | SECOND END KEYWAY WIDTH | 0.2350 INCHES MINIMUM AND 0.2360 INCHES MAXIMUM | | SECOND END DISTANCE FROM KEYWAY CENTER TO END | 0.787 INCHES NOMINAL | | SECOND END EXTERNAL KEYWAY LENGTH | 0.866 INCHES NOMINAL | | SECOND END STYLE | WOODRUFF KEYWAY AND INTERNALLY THREADED | | STEP QUANTITY | 4 | | END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 1.3119 INCHES MINIMUM AND 3.3125 INCHES MAXIMUM | | FIRST END STYLE | PLAIN | | LARGEST STEP DIAMETER | 2.245 INCHES MINIMUM AND 2.250 INCHES MAXIMUM | | MATERIAL | STEEL CORROSION RESISTING | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 3.620 INCHES NOMINAL |
|
|