|
|
|
National Stock Number:
3040-01-332-2443
Federal Supply Class:
3040
National Item Identification Number:
013322443
Description:
COLLAR,SHAFT
Detail:
An item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
|
Manufacturer Information:
| 6G8815 | 11083 | CATERPILLAR INC |
|
Techincal Specification:
| BORE DIAMETER | 19.08 MILLIMETERS NOMINAL | | CHAMFER ANGLE IN DEG | 45.0 | | LARGEST DIAMETER LENGTH | 11.5 MILLIMETERS NOMINAL | | MATERIAL | STEEL | | PROPRIETARY CHARACTERISTICS | PACS | | NOMINAL THREAD SIZE AND LOCATION | 0.250 INCHES SINGLE HOLE | | OUTSIDE DIAMETER | 32.0 MILLIMETERS NOMINAL | | SCREW THREAD SERIES DESIGNATOR AND LOCATION | SINGLE HOLE UNC | | SECURING HOLE QUANTITY | 1 | | SECURING HOLE TYPE AND LOCATION | THREADED SINGLE HOLE | | SPECIAL FEATURES | NOTCH CUT OPPOSITE MTG HOLE ON OD,SIDES OF NOTCH CUT AT 90 DEG ANGLE | | STYLE DESIGNATOR | ROUND W/DOUBLE CHAMFER | | THICKNESS | 14.5 MILLIMETERS NOMINAL |
|
|