|
|
|
National Stock Number:
3040-01-333-1510
Federal Supply Class:
3040
National Item Identification Number:
013331510
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 5819879 | 53711 | NAVAL SEA SYSTEMS COMMAND |
|
Techincal Specification:
| END SIMILARITY | IDENTICAL | | FIRST END DIAMETER | 0.2350 INCHES NOMINAL | | FIRST END SPLINE MINOR DIAMETER | 0.2580 INCHES MINIMUM AND 0.2663 INCHES MAXIMUM | | FIRST END STYLE | SPLINED (INVOLUTE) | | FIRST END PRESSURE ANGLE | 30.0 DEGREES NOMINAL | | FIRST END PITCH DIAMETER | 32.0000 INCHES MINIMUM AND 64.0000 INCHES MAXIMUM | | OVERALL LENGTH | 1.600 INCHES NOMINAL | | MATERIAL | STEEL CORROSION RESISTING | | STEP QUANTITY | 5 | | SURFACE FINISH | 125.0 MICROINCHES |
|
|