|
|
|
National Stock Number:
3040-01-336-0746
Federal Supply Class:
3040
National Item Identification Number:
013360746
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 035-72875 | 9F512 | PARKER-HANNIFIN CORPORATION | | 5145871 | 72582 | ROLLS-ROYCE SOLUTIONS AMERICA INC | | M25-11922 | 9F512 | PARKER-HANNIFIN CORPORATION | | M25-11922 PC 1 | 9F512 | PARKER-HANNIFIN CORPORATION | | PL-M25-11922 REV D PC 1 | 9F512 | PARKER-HANNIFIN CORPORATION |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 1.7160 INCHES MINIMUM AND 1.7210 INCHES MAXIMUM | | FIRST END PITCH DIAMETER | 1.6250 INCHES NOMINAL | | FIRST END PRESSURE ANGLE | 30.0 DEGREES NOMINAL | | FIRST END SPLINE LENGTH | 2.500 INCHES NOMINAL | | FIRST END SPLINE MAJOR DIAMETER | 1.7160 INCHES MINIMUM AND 1.7210 INCHES MAXIMUM | | FIRST END SPLINE MINOR DIAMETER | 1.4530 INCHES MINIMUM AND 1.4710 INCHES MAXIMUM | | FIRST END SPLINE QUANTITY | 13 | | FIRST END STYLE | SPLINED (INVOLUTE) | | PROPRIETARY CHARACTERISTICS | PACS | | SECOND END STYLE | SPLINED (INVOLUTE) | | STEP QUANTITY | 4 |
|
|